A numerical study of dynamic behaviors of a unitized regenerative fuel cell during gas purging

The gas purging states affect electricity output and energy storage capacity of unitized regenerative fuel cells. In this study, a model of unitized regenerative fuel cell is established. Cell voltages and operating temperatures influences on the dynamic distribution of thermal fluid during purging process and the discharge of residual liquid water in electrolytic cell mode are investigated. The motivation of the present study is better understanding the gas purging characteristics and its effect on reaction behaviors of unitized regenerative fuel cells. Simulation results reveal a significant influence of purging gas temperature on the water flooding and a great effect of operating voltage on the water diffusion. The operating temperature of electrolytic cell model almost has little effect on purging results at different cell temperature and the same purging gas temperature. When the purging gas temperature is changed, higher temperatures of cell and purging gas facilitate liquid water discharging out from the cell regions. In cell water flooding situation, when having large liquid content, the purging gas has little effects on the water expelling process.     

A charge sharing–based switching scheme for SAR ADCs

This paper presents an energy-efficient switching scheme for successive approximation register (SAR) analogue-to-digital converter (ADC). The proposed scheme employs charge recycling method to keep the capacitor arrays free of transitional energy between bit generations except reset phase. In comparison with the conventional switching scheme, the proposed one achieves 100% transitional energy saving without considering reset phase. In addition, configuration of a 10-bit SAR ADC shows that the proposed switching scheme reduces the capacitor area by 25% compared with the conventional switching scheme.     

移动物料信息分布式传输方法及应用

在流程工业生产中,移动物料计量信息的传输普遍采用电台和无线模块。接收电台周围环境严重影响计量信息的传输效果,尤其是钢结构厂房、电磁干扰区内,数据传输过程中的丢包率、误码率相当严重。本文提出一种多节点分布式传输方法,根据各个生产作业区环境条件设置相应的WIFI节点数,实现对作业区的无线信号覆盖。网络覆盖区内无线模块、PDA终端(PDA)、终端查询设备通过节点工作频段和阵列天线自适应调节,实现数据传输最佳化。铜熔炼生产现场测试表明,此种传输方法可以有效消除周围环境的电磁干扰,数据丢包率低于0.1%。     

EMA-PRBDS: efficient multi-attribute packet rank based data scheduling in wireless sensor networks for real-time monitoring systems

ABSTRACT

In recent years, Wireless Sensor Networks (WSNs) are widely placed in real-time monitoring systems like environmental, structural, patient monitoring, etc. The major criterion for WSN includes energy efficiency and network lifetime. Scheduling is used as a large number of data packets focus on the same queue at the same time. Only limited data scheduling schemes have been implemented in WSN to enhance the performance. The existing First Come First Serve (FCFS) and Dynamic Multilevel Priority (DMP) have some technical challenges like delay, packet drop and high energy consumption due to starvation and deadlock. In this paper, we proposed a new algorithm to optimise and rank the incoming data packets based on multi-attributes decision-making methodology named as Packet Rank Based Data Scheduling (PRBDS), the algorithm selects packet priority, deadline, and size as the metrics to rank the incoming data packets. A simulation result shows when compared with existing scheduling, PRBDS not only provides less energy consumption, also significantly reduces the packet drop and increases the lifetime. Thus, the proposed algorithm is most suitable for real-time monitoring system since it combines data ranking method with scheduling algorithm to create accurate and reliable results to evaluate the incoming data packets.     

Optimal filtering and control for wireless networked closed-loop control systems

This article studies the optimal filtering and control for wireless networked control systems (WNCSs). In WNCSs, packets may be lost in both control and feedback channels and user datagram protocol is usually used to improve the performance of the real-time control. Relevant literature indicates that the conventional optimal filtering for such a system cannot be applied in practice due to the complex calculation with Gaussian mixtures. This paper proposes a novel scheme to realize the optimal filtering and the linear quadratic Gaussian control for WNCSs, in which the controlled node performs a local estimation and the remote-control node performs the final estimation and control, and a synchronization of two estimators is guaranteed by a communication mechanism. An optimal filtering algorithm is developed, the stability condition of the filtering error covariance is obtained, optimal finite-horizon and infinite-horizon control are derived, and the stability of the closed-loop control system is proved. Numerical simulations show the validity and feasibility of the theoretical results.     

Negative magnetization and exchange bias effect in Fe-doped CoCr2O4

Polycrystalline ceramics of Co(Cr_1-xFe_x)₂O₄ (0?≤?x?≤?0.12) were experimentally studied based on a series of temperature and time-dependent dc magnetic measurements using different magnetic field histories. Magnetization in field cooling process was continuously decreased for doping content x in the range of 0?≤?x?≤?0.04. Remarkable negative magnetization is observed when x reaches to 0.06 and persists up to x?=?0.1. Two-sublattice model is established and competition of the two magnetic sublattices is responsible for the phenomenon. The magnetic switching effect is realized just by changing the magnitude of the applied magnetic field and double magnetocaloric effects are obtained. These unique features under low magnetic fields show attractive for application in spintronic devices due to that the magnetic state can effectively be tuned through magnetic field or temperature. Besides, the system exhibits both positive and negative exchange bias fields which are considered to be originating from the unidirectional anisotropy of exchange coupling of antiferromagnetic/ferromagnetic phases and spin reorientation of the two sublattices magnetic moments, respectively.     

反应釜夹套多介质智能切换控制系统设计

为了解决反应釜夹套内多种介质切换时易因操作失误引起介质混乱的问题,提出了反应釜夹套多介质智能切换控制方案。在生产过程中进行升/降温操作时,程序通过介质标识位自动识别夹套内的当前介质,并通过压空操作时间标准判断夹套压空终点,可以自动完成介质压空及切换等操作。实际应用表明:该方案提高了夹套介质切换的可靠性。     

The visual impact of augmented reality during an assembly task

Many studies have shown the benefits of augmented reality (AR) to improve manufacturing and control processes in industry. However, the presentation of AR content through optical see-through head-mounted displays may induce unnatural viewing conditions, which consequences on the user’s visual system have not been investigated yet. This study aimed at assessing whether using AR instructions to guide a manual task, i.e., conditions where the user is forced to repeatedly look at and accommodate in different planes to extract information from both real and virtual environments, could potentially impact the visual system of operators. A before/after design study was carried out, asking 26 participants to perform Lego assemblies for 30 min with either paper or AR instructions. The effects of using AR compared to paper instructions were evaluated both on binocular vision, with classical optometric measurements, and on visual fatigue, with the Virtual Reality Symptoms Questionnaire. No clinically significant differences in optometric measurements (far/near visual acuity, stereoacuity, phoria, convergence, fusional amplitude, accommodation amplitude, accommodative convergence) have been found between AR and paper instructions, and only negligible fatigue symptoms have been seen specifically for AR. Results from both objective and subjective measurements suggest that there is no impact of AR on the oculomotor system and that, in this specific case of use, AR can be safely used for production operators.